Facade brick tile AQUARIUS
AQUARIUS combines a red-green mottled colour with a smooth surface to create a dynamic facade appearance. Thanks to its resistance to weather and wear, AQUARIUS is a sustainable choice for both modern and more classic projects.
SKU
15.781100W
Dimensions
250 x 10 x 65
Brand
Lode
Weight, kg
0.38
Surface
Smooth
Quantity on a pallet
3000
Colour
red-green variegated
Veiciet pasūtījumu aizpildot pasūtījuma formu
Fill in the form to make a Request at
Questions and Answers
Why does brickwork develop rash?
The brick facade is bricked with mortar. The mortar is composed of different chemical elements. For example, cement contains some free lime or calcium hydroxide Ca(OH)2 or other additives, depending on the manufacturer of the mortar. Salting is most likely to occur if the brickwork is built during the cold season of the year, i.e. from October to April. If the brickwork is laid in the cold season, these soluble compounds may come out on the wall/facade surface with the moisture as the brickwork dries after bricklaying. Moisture evaporates from the surface of the wall, but these soluble compounds that come with the moisture cannot evaporate. They therefore remain on the wall in the form of white spots – salts.
If the brickwork is built during the warm season, these compounds can react with each other and the CO2 in the air to form insoluble compounds that cannot migrate with the moisture and therefore do not reach the surface of the wall. Consequently, no white spots are formed.
White patches can also form if there is no air barrier between the brickwork and the facing wall, resulting in the brickwork being in contact with the facing wall. Depending on the material of the brickwork, the brickwork may then contain elevated moisture content and soluble compounds. As the brickwork dries, these compounds, together with the moisture, can be released into the brickwork and further onto the masonry surface.
However, if the object has to be refinished and there are white salts on the facade, these can be washed off with a pressure washer after re-curing. If this does not help, there are special facade cleaners such as Vincents Clean (fresh water) or Remmers Fassadenreiniger. The instructions given on the detergents must be strictly followed.
Does the brick floor need to be sanded or treated with a product after laying? How can I achieve a surface that is easier to maintain?
Not obligatory, but Remmers Fassadencreme clinker oil can be used. It is designed for easier maintenance, so less water seeps in and it is easier to clean the surface. The clinker surface is specially manufactured to be rough so that there is slip/friction resistance. Therefore, grinding of the pavement is optional, according to the customer’s preference.
Can brick be used for retaining walls in gardens and parks?
Although bricks and paving stones are not manufactured specifically for this purpose, they can be used to build retaining walls.If retaining walls are intended for landscaping areas (gardens, parks, courtyards, etc.), it should be borne in mind that the operating conditions will be quite aggressive – frost, snow, rain, etc.
Materials should therefore have a high frost resistance and as low water absorption as possible.
Of the LODES materials, the most suitable materials for supporting the walls would therefore be:
1) Clinker paving;
2) Full facing bricks (flue).